Shop Now
-
Architectural Tile Trims
- All-Channel Aluminium
- All-Cove Aluminium
- All-Curve Aluminium
- All-Curve PVC
- All-Curve Stainless Steel
- All-Deco Aluminium
- All-Deco Stainless Steel
- All-Edge Aluminium
- All-Prism Aluminium
- All-Prism Stainless Steel
- All-Protecta Stainless Steel
- All-Quad Aluminium
- All-Quad Stainless Steel
- All-Ramp Aluminium
- All-Slope Aluminium
- Birdsmouth Profile
- Flat Bar Aluminium
- Geo Angle Aluminium
- L Profile Aluminium
- L Profile Brass
- L Profile PVC
- L Profile Stainless Steel
- Slimline Profile
- Stair Tread
- Tile Trim Corner Pieces
- Bathroom Accessories
- Diamond Tools
-
Handtools
- Adhesive Mixers & Mixing Paddles
- Diamond Hand Pads
- Finishing Trowels
- Floats
- Gauging & Square Front Trowels
- Grout Removers
- Grouting Tools
- Hacksaws
- Hammers & Chisels
- Hot Melt Glue Guns
- Kneepads
- Knives
- Measuring & Marking Equipment
- Notched Trowels & Adhesive Spreaders
- Packaging Materials
- Paint Brushes & Applicators
- Paint Scrapers
- Safety & Protective Equipment
- Sealant
- Silicone Guns
- Spirit Levels
- Sponges, Scouring Pads & Clean
- Straight Edges
- Suction Caps
- Tile Nippers & Scorers
- Tile Trim Shears
- Wall & Floor Scrapers
- Hole cutters
- Movement Joints
- Sealers & Silicone
- Tile Cutters
- Tile Levelling Systems
- Tile Spacers
Core Drills
-
Description
An electroplated diamond core bit for use with electric drill. Suitable for ceramic, marble, granite and porcelain tiles. Wet use only.
-
Description
A vacuum brazed diamond core bit for use with grinder. Suitable for dry drilling of porcelain, ceramics, marble granite and vitrified tiles. Recommended speed 10000 rpm. Available with an adaptor nut converting M14 thread to M10 thread.
-
Description
A vacuum brazed diamond core bit for use with electric drills. Suitable for dry drilling of porcelain, ceramics, marble granite and vitrified tiles. Recommended speed 3000 rpm.
-
Description
A vacuum brazed diamond core bit set comprising of 6/8/12/20/35/38/50mm core bits plus 10mm and 20mm milling bits. M14 thread with M10 adaptor for use in angle grinder. Suitable for dry drilling of porcelain, ceramic, marble, granite and vitrified tiles. Recommended speed 10000-12000rpm.
-
Description
A premium sintec drill bit for wet drilling of ceramic, porcelain, glazed porcelain, glass, marble and granite.
